Beiträge von Thorvald

I also like the D-Cad - where the drawings functions are the same as in the Dietrichs 3D drawing program. Some of the drawing functions are really nice and better than AutoCad!

I am not quite sure, but I think a revolve function is not there - but maybe to copy round a circle - if you understand what I mean.

It's not a problem (to me) but I just don't understand, why it has to be there (there could be an option where you can check if one want it to be there or not for the single or group of drawings), and why it is locked area.

I have been thinking of the same - so what you really say, is that you cannot change this information in the header? One will have to accept, that the company's name is there allways? Also if you make your own drawing templates?

Why it is so?

Ok - I think I have deleted it now, so I will write a new one. I've sent the e-mail just now.

No answer from hotline yet - how long time they normally use to react??

Ok - sounds interesting that 3D PDF. I think you are right that you need IE to view Tekla models. My goal was just to show you the nice and easy way to make and show sections (and move sections through the building) they have in the Tekla viewer.

Ok - it might not be so simple as I thought. I will found out how, because it should be possible to view the 3D Tekla model in an normal internet browser. Because one thing is to see the picture, but once you try it on your own you will agree, that this simple to use function, is missing in Dietrichs OpenGL.

Well I don't understand much of it - but I don't think that it is what I had in mind. In OpenGL there should be either a menu like the other menus, or perhaps buttons "cut plane X-Y" and "cut plane Y-Z" or whatever - or as intelligent as in Tekla, where you just push "p" on your keyboard and then you choose a cuttingplane. And to move the plane you grab the scissor. An easy way to turn the sections on and off would also be nice. Try it out your self here: Tekla-model.http:// file://Groupinclu/intranet_pictures/Ramboll_Denmark_content/Site_menu/Projektsupport/Fagteknisk%20IT/3D/interaktiv_view/HOM/hom.html#

And see the attached pictures.

It doesn't help much if others in my company have a CD - they are located far from me (Lithuania vs. Denmark).

The seller - Markus Brunn?? Maybe I should write a mail to hotline?

I got two USB dongles one blue for drawing program and one green for engineering calculation program.

And I got a floppy disk (I think with the dongle software, but I am not sure), I got a CD with tutorials etc, and one CD for installation.

See pictures attached.

Wait a minute - the Hundenborn software on the CD is not the full version?? My boss paid for the software - so why I did not get the full version, when we was in Neubiberg?

And if the full version is already on the CD - the how to install only the Hundenborn software??

The engineering program is the Hundenborn static software - the Dietrichs software is not engineering - that is drawing... :lol:

Well never mind - I thought when I installed the software I also installed what is needed for the Hundenborn static software to run.

If that is not the case - then how to install it without "damaging" (reinstalling) the Dietrichs installation??? Will I be able to choose between the two software - is the Hundenborn software on the same CD as the Dietrichs software??

Is it enough to install just the hardlock driver for Hundenborn? - well of course not if the software it self is not installed.

Well I tried to put the Dietrich CD in order to find the file, but no. The hardlock is the USB type - if that was what you meant.

So again how to get access to the engineering software...? :wink:

I put my hardware lock for the engineering program, because I thought I would try to use it - How to make it work? Windows (found new hardware) are looking for "WIBU-BOX/RU" - does this have anything to do with this?

I don't know if it matters - but wouldn't it be more correct to put the valley rafters first and at last the "normal" rafters??

12. I have thought about a new wish - something that could be very useful: A possibilty to define a cutting plane (horizontal or vertical) in OpenGL and in D-cam in future OpenGL mode. This is useful if you are talking with a costumer about his house and you are showing him the house in OpenGL. Then it can be useful to be able to show a section. The software "Tekla Structures" have this option - and there is also a special webviewer, that perhaps could be useful for Dietrichs as well.

Ok - thank you very much for your answer!

OK - that will be later today, because I don't have it here.

Nobody have an idea of why my special elements are not cut correctly around openings??