I have 2 walls, that cannot be zoomed to fill the screen. This seems also to affect groundplan view and D-cam plan view. I have checked if some of the walls should not be connected. It worked before, I was just working with making drawings.
Can't "zoom all".
-
Zitat von Thorvald
I have 2 walls, that cannot be zoomed to fill the screen.
....Are they too small or too large on the screen?
-
Hi Thorvald,
can you show us a printscreen?
Regards,
Jens
-
Yes of course...
-
Hi Thorvald,
please use 1-7-1 to switch on all objects in this building and check if there are some small objects or assisting geometry points at the extremities of the zoom area. If you cannot find anything you can also send us the project.
Regards,
Jens
-
The ground plan looks as if it was mirrored, was it? Could this have caused the problem?
I guess, the solution cannot be found without the project. -
Good morning...
Now I am sufficient tired of this, so here is the position attached.
Edit: Attachment deleted.
-
Hi Thorvald,
in wall design, I found some processes far away from the beams. On the screen you can see them like small dots near the border, and one more, also outside the beam. Delete them all, then the drawing will fit again.
-
Cool...
Thank you - that I would never have figured out...
