How can I taper my concrete pier as shown? Please see attachment.
Thanks!
Kayaker
Taper Concrete Pier
-
Cut the 4 Edges in Dicam.
Sometimes, Dicam will not cut exactly trhough existing end points. It may be useful to define 4 assisting points some millimeters above the bottom. -
Best to use is 3-4-8, if the part is standing in x-y-direction.
But you can use 3-4-1 as well.I cannot believe, that 4 cuts could be a problem?
-
Hi Der_Planer,
Thanks for the help, my concrete pier was not cutting correctly do to the object coordinate system. I changed the object coordinate and the cutting worked fine I now have my tapered pier.
Kayaker
