Straw roof.

Thorvald · 6. Februar 2007

Would it be possible in Dietrichs to draw a roof like this straw roof at the picture?? (Nice house isn't it?).

Der_Planer · 6. Februar 2007

Hi Thorvald,

once I made a texture for this kind of roof. I gave it to someone who asked me, but I never saw his results

I only made a small sample building, so if you need the texture, you can download it from my homepage

Jens Krause · 6. Februar 2007

Hi Thorvald,

just replace one of the pictures "textur?.bmp" in Dietrichs06\GIF\Freitex with your own picture (same size/ properties). Then open Dietrich's again and use object info to change the texture set to the corresponding "user texture ?"

Best regards,

Jens

Thorvald · 6. Februar 2007

- Der_planner: Interesting - I will keep it in mind. But one thing that could be difficult is to make the roof with these curved surfaces and edges, that makes this kind of roof so beautiful.

- Jens Krause: What you are saying is, that any picture as texture? - so I could take a picture of a brick wall or whatever and use as texture.

Der_Planer · 6. Februar 2007

In Dicam you can cut the edges several times, so they look nearly round, and in visualization switch off the black lines.

texture: A texture is more than only a picture, because it must be seamless, the right border has to fit exactly to the left, and the top must fit to the bottom. The area should be 1 square meter in order to show the correct scale in freitext-sets.

Teilen