Relocating the global UCS

    Hi Florian


    I am using 5.04 and in order to rotate an existing building have had to mirror it twice. Once along a 45 degree axis and then again along a 90 degree axis.


    Because of this the bottom left hand corner of the building, (which was at 0,0,0) is now at 0,5.486,0.


    Of course I can move the building along the Y axis by 5.486m, but it would be much quicker to just move the global UCS to a new point.


    Markus tells me that in version 6 we will be able to rotate buildings as well as mirror them. Will we also have the option to either keep or remove the building we want to mirror or copy?


    Cheers


    Rob

    Butch: " I think we lost 'em, d'you think we lost 'em?"
    Sundance: "No."
    Butch: "Neither do I."

    • Offizieller Beitrag

    Hi Rob,


    you cannot move the global UCS to another point but you can create a user defined coordinate system (2-07-5). If this coordinate system is active everything should work with this system.

    Viele Grüße,
    Joachim Neumann (Dietrich's AG) :smiling_face_with_sunglasses:
    Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie


    if (ahnung == 0) { search "Forum"; read Blog; } else { use brain; make post; }