Wall drawing with dimension of post spacing?

Thorvald · 6. September 2006

I have tried and tried an tried - but my wall drawing don't dimension the timber spacings in the wall.

Further more I made a nice drawing template - but it works only with scale 1:100 - can I change that template so that this will be "choice" or make a copy of the template and set the scale to 1:20 for wall drawings?

Der_Planer · 6. September 2006

1. Post spacing: look at the screenshot below.

2. Drawing template: the main drawing window must not contain any elements, even no text. Then the scale will be free.
Make a separate window for text, logo etc., each window has it's own scale and own settings.

Thorvald · 7. September 2006

Hmmm :cry: See here my settings and my result. What is wrong?

Jens Krause · 7. September 2006

Hi Thorvald,

in "wall timber settings" (5-1), what beam type did you select for the posts? It must be one of the beam types in "vertical wall timbers" (611 - 616), otherwise your beams will not be recognized as post and therefore will not be dimensioned as posts.

Thorvald · 7. September 2006

Eiii, ei - no I did not. But I think it is easy to attach that information to the beams at this moment, wall for wall? Can it be done all at once, maybe in D-Cam?

Der_Planer · 7. September 2006

In Dicam: select all posts, then change the "Volumeninfo" with 2-08

Thorvald · 7. September 2006

Ok, very nice, it seems to work now.

Teilen