Beiträge von Kayaker

  • Save Current View

    After doing a save current view in D-Cam, and then opening up D-Cad when clicking on the viewport the insert stored image box opens. The name of the image appears in the list... but I see no preview of the image? 8O


    Kayaker

  • View Truss

    Thanks Guy’s!


    That worked pretty nice. Now I'm just wondering how one would go about it if a wall was not assigned to the truss.


    Kayaker

  • View Truss

    I have the truss in wall 3 now I need to go to 6-2 mos set and do what? If I go to IF walls and check the box all 7 trusses come up.


    Thanks!


    Kayaker

  • View Truss

    I have seven trusses what's the fastest way to show just one of them when needed in D-Cam? :roll:


    Thanks!


    Kayaker

  • Drilling

    I want to drill a hole of 13/16" centered on the sloped surface and perpendicular to it through the beam can anyone help?


    Thanks!


    Kayaker

  • Recalculate Roof

    Hi Der_Planer


    I changed the Obhoz to 6 " in my roof profile and recalculated the roof design and recalculated the roof construction. Nothing happened, "I edited my plates" I saw the Obholz was still at 5" I changed it here manually and the rafters changed. Shouldn’t it have changed automatically when I changed the Obholz in the roof profile and recalculated?


    Thanks!


    Kayaker

  • Recalculate Roof

    After modifying my roof profile how do I get the rafters to update? I placed the rafters using rafters from profile. I tried recalculating but still no change in the rafters.


    Kayaker

  • Roof Area

    Thanks Der_Planer


    Now I need Sq ft rather than m2. I went to settings / units and checked the box square feet.... but I still see the units in square meters.


    Thanks Again!


    Kayaker

  • Roof Area

    I have a T- shaped building with an east / west and north / south axis. I would like to get information on the square feet of just the north / south roof. But not sure on how this is done?


    Thanks!


    Kayaker

  • Assisting Geometry Lines

    I like the import approach as well, but I'm hung up on the import factor the default is 1.000000 and lines are not in proportion to the drawing when the lines are brought in. I need to reset this import factor to?


    Thanks!


    Kayaker

  • Assisting Geometry Lines

    In wall design, I used assisting geometry lines now I would like the same lines for some basic layout in another wall. I thought I would be able to copy and paste, can assisting geometry be copied to another wall? :roll:


    Kayaker

  • Dietrich's Calculator

    Hi Jason,


    I'm lost... my units are in feet and inches. I see Jens, just posted that this seems to be a program error. I'll use my scientific calculator for now !


    Thanks to All !


    Kayaker