Beiträge von Thorvald

I don't have the CD - but I have a copy of it on my HDD. So I will try to start setup.exe from directory holzlist. I just don't understand why it does not work now, when it did the first time I installed my computer. But I am not sure if I copied my Dietrichs program from new to old computer, before I started using the old computer, meanwhile. I don't think I did - as I thought since the program still was on the old computer and working, then why do that. But I don't know if that could be the cause.

I try to open the project data program directly. Now I just tried to open it from the construction program. It gives below error message.

When I sent my computer in for repair, I used my old computer in the mean while. When I got my computer back from repair I copied the program from the old computer, via external harddrive, as I did, first time I installed my "new" computer.

[Blockierte Grafik: http://i744.photobucket.com/albums/xx81/Thorvald73/Building%20construction/Errormessage29-072012.jpg]

Well, I cannot figure out how to show the extension. But if I right click on it and choose "properties", it says that it is a .ini file.

Well - some of the files shows extensions, this, does not.... I tried to simply add .INI to the filename, but it doesn't work.

Windows 7, Dietrichs 7.03, if it matters.

Hmmmm?

I found the file, but I cannot see the extension of the file.

I did the same as we talked about on page 1 - because I had to send my computer in for repair and after getting it back I have been reinstalling all programs. But now - when I try to open Project Data Program it says that "DHPDAT.INI" nicht gefunden". How to fix that?

I am asking if they tried that.

I thought that maybe somebody here, knew it - as I think most here also have AutoCad software. I don't have any connection to AutoDesk. But yes, I could ask them.

Hi.

Is it not possible to install 32 bit ACad on 64 bit Windows 7?? I would have thought that it is possible. It is one of my colleagues in Lithuania - see error message below.

I see, so this is a way to share a single material?

Hi.

If I for example would like to share a concrete stair profile with someone else, is it possible to send that material database position to that person? (Version 7.03).

You're right! I just tried it out and now the roof ridge line is on top of my assisting geometry that illustrates the centerline of the house...

Really? - I did not know that function / feature. I have allways used a "manual" solution in such cases. But of course it is not totally exactly, but it have worked fine untill now. That I have to try out.

I tried to use recalculate, with no better result. I'll try again tomorrow after the computer have been restarted. I don't think I get more time to work today.

Can you see my assisting geometry?? When I draw lines - the center line of the house and the line in center of roof calculation these lies appr. 30 mm away from the ridge line of roof calculation??

Hi.

This one I have a hard time to figure out why. I started to work on the walls under the roof, when I found that there was something that was not symmetric. Everything is symmetric - the roof outlines are symmetric related to the outside walls, same overhang at both sides, same roof slope etc. But the ridge of the roof is shifted 30 mm from the centerline of the house.

Can anybody see why??

I ended up using CutePDF.

Yeah, I also think I normally get colors exported as well. Well, if somebody complains about it, I can think more about about it. If nobody complains about it.....

Hi.

Dietrichs 7.03. When you convert (export) drawings to dxf, it does not convert colors?? If a layer in D-Cad is set to some color, this color is not copied to the dxf file?

I just want to ask, so I know if I can do something about it or not.

My Dietrichs mouse pad is beginning to be broken in a few places. How to get a new???