Beiträge von Thorvald

Hmm, not many answers... :wink: Well 2 things could be said about this: As long as we work as we do now: I make all constructions in Dietrischs and take out all the blocks she will need to make the drawings ind D-Cad - then the better would be that I send to her the whole project file, so that we all the time have the same block numbers etc. ??? But the whole project is a bit over 100 Mb (and it is not finished) - but we have ftp-server, so it is possible.

A even better way might be that she herself take out from Dietrichs what she needs to make the drawings. But that is not an option at the moment.

Maybe I should add, that I use D-cam, when I take out drawing information for roof elements. And I use ground floor module and wall module, when I take out drawing information for walls and ground floor drawings.

She says: "Every time when I starting to make drawings i have to set all settings anew.I think this time I have the same problam with these drawings. Could You write me, in Roof areas drawings, rafter-plate drawings and single beams drawings, what kind of settings I have to set?"

I say: "Why you have to do any settings there?? To my opinion you should need nothing else (when you have put the files in correct place), than to open D-Cad program and take into the drawings, the drawing files that I have prepared in the Dietrichs program. I take out from the Dietrichs program all what you need in the D-Cad program. You should not do anything in the Dietrichs program. (??)"

She says: "If I not do anything in Dietrichs program- in setting, I see only elements frames."

???

Well, let's say, that I have finished constructiong something - a house t.ex. and I am going to send it to my assistant in Lithuania, so she can make drawings to this position. Maybe I have prepared some of the drawings. I send the packed position zgb-file to her and perhaps more or less plf-files, depending on how many drawings I have prepared for her to finish.

It seems, like everytime she have problems to open the drawings, etc. even though she put the files in the correct place and unpack it etc.

We both have version 6.02 - the difference is just that my version is on higher level, than hers (premium modules etc.). The project consists of many positions since the project consits of many houses.

What can go wrong?

How to put OSB boards on the roof?? I have upgraded to D-roof premium, so it should be possible, right? I don't use the elementation module yet, even though I got that one also. First I don't think it will be an advance for the project I am working on now, secondly I don't have time to find out how the elementation module works.

But back to the question, how to put OSB boards on the roof??

Can I send a position to one of you, so you can send it back to me as a 3d autocad dwg file???

And what is that "relatively minor" cost!??

Is it possible to convert 3D Dietrischs model to a autocad 3d dwg model???

I am happy :wink: - but on my desktop I have icons for Project data and Dietrichs for both for 5.04 and 6.02. But on the C-drive there is only one Dietrichs folder "Dietrichs05" So maybe everything is ok - and I can delete the 5.04 icons on my desktop, and make no other changes??

I made an update installation - but perhaps the result looks like an parallel installation?? Why?

Finally I took the time to install my new 6.02 on my desktop computer. I choose update installation in order to update from 5.04. In settings and paths, most path refer to version 5 - why? And version 5.04 icons on the desktop and the program is still there. Why is it not replaced with 6.02??

No one can answer the above question??

Another question could be: Can I send just drawings to her? I mean, she make a new project in Dietrich, but this project is empty - no constructions or anything. I send her only the drawings, and when se put the drawings in the project folder, so when she opens PlanCad, she can work with the drawings??

Well, i have renamed the 25 mb pla, and now it is much better.

Thank you very much for all your help!!

So - there is nothing I can do about it, to make it work better? It is only this project that is a problem. But if in general the program could be faster with a little programming from the developers, then of course, it could be nice.

Ok - have send it now.

What is your e-mail address??

Æææh, I don't know - I don't know exactly what you mean. I don't think so.

No, I don't have antivirus software on this computer...

I don't have antivirus on this computer.

So something else is wrong - because my computer is quite strong - even though it is "only" a laptop. Core 2 Duo 2GHz, 3GB Ram etc.

Can it be because I have several drawing images - normally I would have one for each plan, one for all walls etc. But here I have more versions for walls. And I am even not finished. Next is horizontal division and roof. Is it possible to delete the images that one take out from Dietrichs?? (like the walls, t.ex.).