Purlins

    I have a roof profile, I placed plates and rafters using rafter and plates from proflie. Now I want to distribute purlins on top of the rafters along it's length. Is there a tool to do this? I'm trying the tool rising plates, but can't seem to get the purlins on the top of the rafter.


    Thanks!


    Kayaker

    • Offizieller Beitrag

    In modul roof construction there is no function to distribute purlins.
    If you enter this purlins in the profile they would will be imported automaticaly.
    Another way is to enter the purlins by hand. To do this your roof should have slices. Now you can enter plates in the slice on the upper side of the rafters.

    Viele Grüße,
    Joachim Neumann (Dietrich's AG) :smiling_face_with_sunglasses:
    Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie


    if (ahnung == 0) { search "Forum"; read Blog; } else { use brain; make post; }

    Thanks Joachim,


    What I did was created a slice in my roof and used the rising plate tool in roof design went back to D-Cam copied and distribute the purlins along the rafter length. It got me what I wanted. So I could have entered the purlins I wanted in my roof profile would I have done this with battens settings?



    Thanks for the reply !


    Kayaker