Optimization profiled beams (in lenght)

    • Offizieller Beitrag

    The problem is exactly described in the message. The volumes do not have an order number and then they cannot be optimized.
    In the most cases the order number is the same than the ident number.

    Viele Grüße,
    Joachim Neumann (Dietrich's AG) :smiling_face_with_sunglasses:
    Software für den Holzbau, Abbund, Holzrahmenbau, Blockbau, Ingenieurholzbau und für die Fertighausindustrie


    if (ahnung == 0) { search "Forum"; read Blog; } else { use brain; make post; }

    Hi, how to create or copy similar profile with all needed data. Example steico SJ 90x250 mm - in materials there is SJ 90x240 mm. Manufacturer preparing this standart too.

    Vilmantas Liutkus
    Constructor engineer
    Roof constructions, timber frame - shield houses

    From Project Data Program, select Master data - Material database (4-2).


    Once in Material database, select:


    Beams/Profiled Beams: Wood, Wood Products
    -STEICO (SteicoWall, SteicoJoist)
    -SJ 90x240 - STEICO Joist 90x240


    You can choose to copy this profile using the buttons @ bottom left of the screen. After that, modify Item number, Designation & Order number @ top right of screen. Finally, edit profile to match the desired dimensions.


    Note: The original optimization query requires the material to have an Order number, which will be resolved by following the above procedure.


    -Good luck :smiling_face: