Hi Guys:
We use a Hundegger speed cut machine to produce our frames. The machine is capable of reading the machine files created in dietrich but its not capable of importing all the processes, or import them wrong.
We have tried both the beam post processor (1-02-01) and the link to beam processor (1-02-1) with no luck, so I wonder is there any way we can get a link for dietrich to solve this problem?
Thanks in advance
Hundegger Speed Cut
-
-
The speed cut cannot produce all processes you can enter in our program and the import in the speed cut machine is made by Hundegger. So perhaps this import could cause errors too.
To test the problem we need your project and the information which process at which beam produces problems. -
Hi Guys:
There are a couple of processes that the Hundegger speed cut is more that capable of doing, however the machine can't not import the processes correctly or at all from Dietrich's. The processes are the scarf joint and the notched lap (3-9-5 in version 10). I know the machine is capable because we can do them manually on the machine console. Please find position attached.
Thank you -
I made a test in the current version 11 where we implemented a completely new data transmission to the Speedcut and all processes were transferred.
The old version 10 will not be changed anymore.
