Hello, Merry Christmas and Happy New Year for each of our company!!!
I would like to ask foolish question regarding creating and visualizating drilings. How to do that (I never use that function)?
drillings in view?
-
-
Second question in same case:
how using project data module to prepare and sent to word all quantity of operations? -
Once you have created the drilling and have turned on the view of drilling under display you should see it when you do a rendering.
See attached. -
Hi, Jim, sorry, but I think you dont answer to mine questions, or I dont understand what do you mean.
-
Do you want to know how to enter a drilling or did you enter it already and you do not get it visualized?
To get a drillig visualized you have to enter a diameter smaller then your drillings in the function 3-1-02.The quantity of processings you get if you transfer the beams to the project data program. Then you transfer this material list to the dimension take off and make an output of the dimension takeoff.
-
Hi, thanks regarding project data program.
Looking to first problem I am attach picture with explanation.
Can you look to other post: http://user.dietrichs.com/Forums/viewtopic/t=11518.html -
The drillings of the birds mouths are not created as drillings they just exist as tag of the birds mouth. This is the reason why they are not visualized. As you saw they are transfered to machine and this is what we want.
The drillings at the tenons should be created at bothe beams. The diameter of the two drillings can be different and so you have to enter them both. Perhaps you entered one drilling with diameter 0.000.
-
Thanks, regarding drillings on the mortise and tenon you was right.
Can we show drilings on rafters (just for showing)? -
As I told you above this is not possible. This drillings do not exist as drilling but just as tag of the birds mouth.
